CLICK：3309TIMES ADD TIME：2017-05-13 11:16:29
Brand: AVIC PC/ABS alloy products
Packing specification: 25KG
Compared with PC, PC/ABS alloy has the following advantages:
First, in a wide range of use conditions will only be plastic damage, residual stress, stress cracking resistance, at room temperature, the impact strength of 3~4 times PC.
Two, good resistance to boiling water, after 100 degrees, after treatment for 240 hours, the tensile strength and bending strength of the same number of tensile strength for the same conditions of PC treatment more than 3 times.
Three, good aging resistance, after 120 degrees, after treatment for 140 hours, the impact strength of PC is still more than 2 times.
Four, excellent weather resistance, outdoor exposure for 2 years, tensile strength and bending strength is almost unchanged, the impact strength of PC more than 4 times.
Five, melt viscosity reduced by 1/3, so the molding temperature can be low, easy molding, residual stress reduction, product color is better. In addition, the melt viscosity of the blends decreased with the increase of molding pressure, but also improved the formability.
Widely used in machinery, instrumentation, automotive parts, electronic and electrical, railway, home appliances, communications, textile machinery, sports leisure supplies, oil pipes, oil tanks and some precision engineering products.
Electronics: connectors, spool, timer, circuit breaker, switch shell seat cover
Car: cooling fan, doorknob, fuel tank cap, grille, tank cover, lamp holder
Industrial parts: seat, bicycle frame, roller base, textile shuttle, pedal, slide
Description: PC/ABS has both PC and ABS integrated characteristics. For example, the ease of processing of ABS and the excellent mechanical properties and thermal stability of PC. The ratio of the two will affect the thermal stability of PC/ABS materials.
PC/ABS this hybrid material also shows excellent Flow characteristics.